1 An invalid degree of polynomial has been allowed. Please \nadjust this parameter or disable the polynomial family.
2 The maximum polynomial degree is too high or too low. CurveExpert\nsupports polynomials up to 19th degree.
3 Preferences Error
4 The number of maximum iterations must be positive.
5 The tolerance for nonlinear regression convergence must be positive.
6 The default polynomial degree must be positive but less \nthan the maximum specifed in this dialog.
7 The number of diverging iterations must be positive.
8 Sorry, no curve fit(s) of the selected group could be calculated.
9 CurveFinder Message
10 Model Definition Error
11 A syntax error has occurred while trying to process this model.
12 Operation Aborted
13 Sorry, this operation cannot be performed on this many data \npoints. This is a limitation of 16-bit Windows.
14 Initial Guess Failure
15 An attempt to provide an initial guess\nhas failed. Please supply initial\nguesses for this model.
16 A division by zero has occurred in the %s routine, function %s. Check the data for zero values that might cause this error.
17 An overflow has occurred in the %s routine, function %s. This usually indicates a divergence of the nonlinear regression algorithm -- scaling the data or using different initial guesses could help.
18 An arithmetic underflow has occurred in the %s routine, function %s. Check the data for negative and/or zero values that might cause this error.
19 An unidentified arithmetic error has occurred in the %s routine, function %s. Check the data for negative and/or zero values that might cause this error.
20 A domain error has occurred in the %s routine, function %s. This could mean that there are zeros/negatives in the data or that the nonlinear curve fitting algorithm has diverged.
21 A singularity error has occurred in the %s routine, function %s. Check the data for negative and/or zero values that might cause this error.
22 An invalid operation has occurred in the %s routine, function %s. Check the data for negative and/or zero values that might cause this error.
23 The nonlinear regression algorithm for the %s routine has diverged -- scaling the data or using different initial guesses could help.
24 User has canceled the %s curve fit. %s
25 %s curve fit has failed.%s
26 A memory allocation error has occurred while processing the %s curve fit (%s bytes allocated). Some memory was freed as a result, but you still may have to terminate.
27 There are too many data points to perform %s.%s Interpolation is likely to oscillate wildly. However, you may change the max setting in the Preferences dialog
28 A syntax error has occurred in the processing of a %s. Please check the definition.%s
29 Delete User Model
30 This action will permanently remove this user-defined model. Proceed?
31 File Protect
32 This file was marked Read-Only when it was opened, so saving to this file is not \nallowed. You may, however, save this as a different file.
33 File Export Error
34 A curve fit must be selected to export a file. Please try again \nor cancel the export operation.
38 Error starting a page on the printer. Print operation aborting.
39 Document Error
40 Error starting a document on the printer. Print operation aborting.
41 File Error
42 Cannot open a new data file. Write failed.
43 Cannot open the data file. Read failed.
44 Bad or malformed data file. Read failed.
45 Out of Range
46 The arguments that you have given are out of range for this data set.
47 Calculate Groups Message
48 Sorry, no curve fits of the selected group(s) could be calculated.
49 Not Enough Points
50 Not enough points for a higher order polynomial regression.
51 Invalid Filename
52 The filename given is invalid. Please try again.
53 Table Parameter Error
54 The increment must be nonzero. Please check the value entered in the Increment field.
55 The signs of (xmax-xmin) and xincr must match for table generation to be successful.
56 Common Dialog Error
57 An error has occurred in a Windows common dialog. Error code %ld.
58 A fatal error has occurred in the painting of this graph. Please\nclose this window, or reset the graph extents as appropriate.
59 A fatal error has occurred in the drawing of this hardcopy. Check the\nextents of the graph and check for singularities in the model.
60 A fatal error has occurred in the drawing of this metafile. Check the extents of the graph and check for singularities in the model.
61 CurveExpert only supports quadratic splines with less than 100 points in the data set.
62 Quadratic Spline Error
63 Invalid Polynomial Degree
64 Check the Preferences dialog to determine the maximum allowable \ndegree. Note that n < 3 is not allowed.
65 Tension Parameter Invalid
66 The tension parameter may not be zero or negative.
67 Invalid Model Name
68 Since the comma is used internally by CurveExpert in the\nuser model name, it may not be used here.
69 Integration
70 When integrating, the left endpoint must be less \nthan the right endpoint. Please try again.
71 DLL Not Found
72 The tabbed dialog library was not found. You may continue, but many \nfeatures will not work. Please reinstall your software.
73 Graph Properties Error
74 The plot properties dialog can only be open for \none graphing window at a time.
75 Clipboard Error
76 Insufficient memory to carry out clipboard operation. The desired text was not copied.
77 There are not enough data points to perform the desired order of \nregression. Perhaps interpolation would be appropriate.
78 Drag and Drop Error
79 Sorry, multiple files cannot be dragged to CurveExpert's \nmain window. Please select one file only.
80 An error has occurred initializing the help file location. The\n online help will not be available during this session.
81 Help File Error
82 An error has occurred loading CTL3DV2.DLL. CurveExpert\nwill run, but dialogs will not be attractively drawn in 3D.
83 DLL Loading Error
84 The initialization file (CURVES.INI) was not found in the\nWindows directory. Creating a new copy.
85 INI File Alert
87 An error has occurred creating CURVES.INI. If you continue, you \nwill not be able to change any application defaults.
88 Sorry, you may only add up to %d points manually.
89 Data Overflow
90 Remove Data Point
91 Sorry, an error has occurred in your data processing.
92 Application Error
93 An unrecoverable error has occurred. CurveExpert must\nterminate at this time. Please contact the author\n concerning this problem.
94 Sorry, but CurveExpert must terminate at this time.
95 Unhandled Exception
96 A fatal error has occurred. Please write down the information\nforthcoming, and contact the author about this error.
97 Out of Memory
98 A memory allocation error has occurred. Click OK to attempt to \nfree some memory, or Cancel to abort CurveExpert.");
99 3D Effects
100 The 3D effects change will take place in the next CurveExpert session.
101 Security Alert
102 The owner information has been modified, damaged, or\nlost. Please reinstall your software.
103 Sorry, only one instance of CurveExpert can be run at a time.
104 Information Dialog Error
105 Sorry, only one graph information dialog may be open at a time.
106 Printing %s data on %s connected to %s\n
107 The spreadsheet dialog library was not found. You may continue, but many \nfeatures will not work. Please reinstall your software.
108 There are not enough columns detected in the data file to read a two-column data set.
109 The open file operation has been aborted by the user.
110 Invalid File Import Settings
111 The number of dependent variables must be one.
112 More than one independent variable is not supported by\nCurveExpert at this time. This is in the works, so\nplease check a later release of CurveExpert soon!\n[10/1/96]
113 The number of columns read must be positive
114 The number of columns to read from the data file\nis greater than the number of columns detected.
115 The file import settings are invalid. You must have at least\none dependent or independent variable.
116 An invalid starting column has been entered. Please\nexamine this entry.
117 Edit Data Set
118 No data is selected to perform a copy operation.
119 File Error
120 An attempt to write a table file has failed. Check\nto see if an identically named file exists.
121 The deletion of a complex data region from\nthe data set is not yet implemented.
122 This operation will add a column to the data set. Proceed?
123 The addition of a data column has failed.
124 This operation will delete a column from the data set. Proceed?
125 The deletion of a data column has failed.
126 Copy and paste areas are different shapes.
127 The number of undo levels must be greater than zero and less than 99.
128 CurveExpert was unable to read the data on the clipboard.
